Animation demonstration of construction process of integrated thermal insulation and decoration board — EPS line coating, real stone paint,


Step 7 tear off the protective film on the surface of the integrated board after the completion of the protective film step 8 install the exhaust valve because the integrated board is a closed system, and if the internal water vapor is not discharged in time, it is prone to condensation, which will affect the energy-saving quality of the external wall, so it is necessary to install the exhaust valve in a scattered manner.

Xinming design studio is based in Henan Province.

It is believed that in the near future, most of the entire exterior wall insulation and decoration market will be replaced by integrated panels.

For specific design requirements and processes, please consult the following design director (long press the QR code below to scan and wechat) (wechat account ximingsheji)..

Ensure convenient construction, ensure the utilization rate of plates, and ensure beautiful appearance.

With the continuous development and progress of social economy, buildings are increasingly pursuing external aesthetics, which requires complex exterior wall decoration.

The bonding rate of more than 60% shall be ensured, and there shall be no less than 2 fastener anchor points on each side of each plate.

Spare no effort to protect the construction unit from accurate construction and cost saving! If you need to design the stone line coating of exterior wall insulation curtain wall in depth, please contact the studio engineer.

The seventh step is to apply sealant, which is very important for the final effect of the external wall.

The chief designer of exterior wall has 1 million square meters of construction experience and more than 10 million square meters of deepening design experience in exterior wall insulation / coating engineering, covering foreign-style houses, villas, high-rise and other projects, involving insulation systems such as rock wool board / strip, XPS extruded board, EPS expanded polystyrene board, foamed ceramic board, cement foamed board, inorganic insulation mortar, molded polystyrene board, insulation decoration integrated board and other exterior wall insulation systems, The coating types involved include smooth / rough water in water color stone coating, real stone paint coating, elastic coating, flat coating, texture scratch sand coating, etc.

The deepening of exterior wall decorative lines, coatings and stones is increasingly essential.

PVC Chamfer

The first step is to clean the base course, chisel the uneven parts of the outer wall that affect the bonding force, and spray water for cleaning before painting.

At present, the studio’s exterior wall deepening design team currently has 1 design director and 10 team members, who specialize in deepening and optimizing the design of various exterior wall insulation interface construction drawings / as built drawings, EPS line deepening cutting drawings, exterior wall coating division and joint design, exterior wall stone aluminum plate curtain wall deepening design, exterior wall coating interface deepening construction drawings / as built drawings, exterior wall facade control effect drawings, etc.

The second step is to paint mortar, and the whole painting process shall be carried out at least twice.

According to the drawings and the actual size on site, the hanging line and setting out shall be carried out, and the plate size shall be adjusted after the actual measurement.

Before construction, the exterior wall shall be reasonably typeset and further designed.

Original: what is the function and significance of the deepening design of the external wall — the EPS line coating, real stone paint, water in sand drawing, deepening design, division and joint effect drawing, construction completion drawing, external wall insulation line coating, stone curtain wall engineering, how to deepen the design cost process is here! Taobao platform announced – Xinming design studio today, let’s demonstrate the installation and construction process of building exterior wall insulation and decoration integrated board.

Experienced workers should be selected to apply sealant on site.

Step 3: Typesetting and setting out.

The sixth step is to embed a sponge strip with a diameter 2 mm larger than the seam width into the plate seam at a depth of 10~20 mm.

The thermal insulation and decoration integrated board has high requirements for the flatness of the base, so the flatness of the plastering mortar should be strictly controlled.

If you need to deepen, please scan the QR code below and contact the studio engineer wechat.

At this stage, the whole exterior wall insulation and decoration system is completed, and the construction of the exterior wall insulation and decoration integrated board is convenient, efficient and beautiful.

Step 5 paste and anchor the insulation decorative integrated board.

Step 4 install the bracket, which can be galvanized angle steel bracket or aluminum alloy bracket.

On site, precise cutting, side slotting, numbering, classification and stacking shall be carried out.

The deepened exterior wall drawings can greatly improve the convenience and accuracy of budget and the accuracy of construction.

Tags:

Related Post